To hang the IR receiver on a wall
1
Install a commercially available screw
in the wall so that it protrudes 4 mm.
2
Detach the IR receiver stand and hang
it via hole on the rear side of the IR
receiver on the screw.
Make sure that the IR receiver does not
move after installation.
• When reattaching the IR receiver stand to the IR
receiver, attach the stand so that both delta marks on
the IR receiver and stand are aligned (page 16).
To hang the IR transmitter on a
wall
1
Rotate the stand of the IR transmitter.
2
Install 2 commercially available screws
in the wall so that it protrudes 4 mm.
Install the screws 30 mm apart.
3
Hang the IR transmitter via hole on the
bottom of the stand on the screw.
Make sure that the IR transmitter does not
move after installation.
• You can store the cords in the troughs in the bottom
of the stand.
Tip
4 mm
IR receiver
IR receiver stand
Tip
Stand
IR transmitter
30 mm
4 mm
IR transmitter
Stand
