Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
81
GB
Note
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the
V
marks are aligned.
• Do not insert anything other than the wireless
transmitter into the EZW-T100 slot.
3
Make sure to use the same screws to
secure the wireless transmitter.
Note
• Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
Tip
• When you change the S-AIR configuration, Sony
recommends that you perform [AUTO
CALIBRATION]. For details, see “Calibrating the
Appropriate Settings Automatically” (page 87).
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Press
"
/
1
on the unit.
The system turns on.
2
Press SYSTEM MENU.
3
Press
X
/
x
repeatedly until “S-AIR ID”
appears in the front panel display, then
press
or
c
.
Note
• When the wireless transmitter is not inserted in
the unit, “S-AIR ID” cannot be selected.
4
Press
X
/
x
to select the desired ID.
You can select any ID (A, B, or C).
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
7
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
CENTER
SUBWOOFER
HDMI OUT
SPEAKER
EURO AV
OUTPUT(TO TV)
COAXIAL 75
FM
ANTENNA
DMPORT
DC5V
0.7A MAX
DIGITAL IN
COAXIAL
OPTICAL
TV
FRONT R
FRONT L
SUR R
SUR L
SPEAKER
EZW-T100
Rear of the unit
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Summary of Contents for DAV-DZ680
Page 123: ......
