Sony D910B, Service Manual

Page: 12 / 135

1-2
12
Connecting the DVD-VCR
Additional connection
To a satellite or digital tuner
with Line Through
Using the Line Through
function, you can watch
programmes from a satellite or
digital tuner connected to this
DVD-VCR on the TV even
when the DVD-VCR is turned
off. When you turn on the
satellite or digital tuner, this
DVD-VCR automatically sends
the signal from the satellite or
digital tuner to the TV without
turning itself on.
Notes
• This function may not work with some types of satellite or digital tuners.
• When the DVD-VCR is turned off, set the TV to the video channel.
1
Connect the satellite or digital tuner to the LINE-3 connector as shown above.
2
Turn off the DVD-VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
PERITEL cable (not supplied)
LINE-3 SORTIE
LIGNE
: Signal flow
Getti
ng Sta
rted
13
Setting up the DVD-VCR with the Auto Set Up function
Step 4 : Setting up the DVD-VCR with the
Auto Set Up function
Before using the DVD-VCR for the first
time, set up the DVD-VCR using the Auto
Set Up function. With this function, you can
set TV channels, guide channels for the
ShowView system
∗
, and DVD-VCR clock
automatically.
∗
SLV-D950B only
1
Turn on your TV and set it to the video channel.
2
Connect the mains lead to the mains.
The DVD-VCR automatically turns on and the
“SELECTION DU PAYS” menu appears.
V/v/B/b
ENTER
SET UP
Schweiz
RETURN
SELECTION DU PAYS
SET UP
ENTER
Français
b B
continued
14
Setting up the DVD-VCR with the Auto Set Up function
To cancel the Auto Set Up function
Press SET UP.
Tip
• If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 15.
Notes
• Whenever you operate the Auto Set Up function, some of the settings (ShowView, timer, etc.)
will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first time after
you purchase the DVD-VCR.
• If you want to use the Auto Set Up function again, select “Installation” in the “OPTION”
menu, then press
V/v
to select “Installation Auto”, then repeat step 3.
• Auto preset can be performed by pressing
x
on the unit continuously for 5 seconds or more
during power off with no tape inserted.
3
Press
B/b
to select your country, then press
ENTER.
The DVD-VCR starts searching for all of the
receivable channels and presets them (in the
appropriate order for your local area).
If you want to change the order of the channels
or disable unwanted programme positions, see
“Changing/disabling programme positions” on page 21.
After the search is complete, the current time appears for any stations that
transmit a time signal. If the time does not appear, set the clock manually.
See “Setting the clock” on page 16.
ENTER
Merci d’attendre
RETURN
INSTALLATION AUTO
SET UP
10%
Getti
ng Sta
rted
15
Selecting a language
Step 5 : Selecting a language
If you prefer an on-screen language other
than French, use the on-screen display to
select another language.
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press
V/v
to select
(OPTION) and press ENTER.
2
Press V/v to select “Langue”, then press
ENTER.
The “SELECTION LANGUE” menu appears.
3
Press
V/v
to select the desired language, then press ENTER.
4
Press SET UP to exit the menu.
V/v/B/b
ENTER
SET UP
SET UP
ENTER
Langue
Installation
Veille Auto
Messages Ecran
Réglages Utilisateur
L’horloge
:Français
[ Non ]
[ Oui ]
RETURN
OPTION
SET UP ENTER v V
ENTER
RETURN
SELECTION LANGUE
SET UP ENTER
v V
English
Français
Deutsch
B
Español
Italiano
Nederlands
ENTER
SET UP