2-12E
DSC-W200_L2
qa
Naruto Shaft
qa
Naruto Washer
qa
Naruto Gear
qa
Screws
qa
Zoom (1210)
Gear Block Assy
8
Remove the rubber band and the old ornamental ring (B).
9
Remove two screws, zoom (1210) gear block assy, naruto gear, naruto washer, naruto gear in order.
q;
Rotate the gear of cam ring to retract the lens barrel into the camera body, and confirm that the front of camera is flat.
qa
With the lens barrel retracted into the camera body, install the naruto shaft, naruto washer, naruto gear, zoom (1210) gear
and block assy in order, and the fix the zoom (1210) gear block assy with screws.
*Tightening torque=0.049 0.01N m(0.5 0.1kgf cm)
9
Naruto Shaft
9
Naruto Washer
9
Naruto Gear
9
Screws
9
Zoom (1210)
Gear Block Assy
Confirm that the front
of camera is flat.
8
Rubber band
8
Old Ornamental
Ring (B)
Naruto
Washer
Install the naruto washer in the direction
shown in the figure.
q;
Gear of Cam Ring
