45
U
si
ng func
tions
for
s
h
ooti
ng
Shooting menu
For details on the operation
1
page 30
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance
to the subject, if the subject does not see the pre-strobe, or other conditions. In such a case, you can correct
the red-eye phenomenon using [Retouch] in the viewing menu after shooting (page 49).
• This setting is not available depending on the Scene Selection mode (page 34).
• If you set [Face Detection] to [Off], the Red Eye Reduction does not work, even when you select [Auto].
Selects the anti-blur mode.
• When [
Auto Adjustment] mode is selected, [SteadyShot] is set to [Shooting].
• For movies, the options are limited to [Continuous] and [Off].
The default setting is set to [Continuous].
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Select the settings for the shooting function. This items appearing in this menu are same ones
as those in
(Shooting Settings) on the HOME screen. See page 29.
Red Eye Reduction: Reducing the red-eye phenomenon
(Auto)
When [Face Detection] is set to [On], the flash strobes
automatically to reduce the red-eye phenomenon.
(On)
The flash always strobes to reduce the red-eye phenomenon.
(Off)
Does not use Red Eye Reduction.
SteadyShot: Selecting the anti-blur mode
(Shooting)
Activates the anti-blur function when pressing the shutter
button halfway down.
(Continuous)
Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
(Off)
Does not use anti-blur mode.
SETUP: Selecting the shooting settings
