Sony Cyber-shot DSC-S85, Service Manual

Page: 14 / 25

– 14 –
Order Page Address Data Procedure
19 1
Check that the displayed data
(Note 3)
satisfies the R ratio specified
value.
20 0 03 05
21 1
Check that the displayed data
(Note 3)
satisfies the B ratio specified
value.
22 6 01 00 Press PAUSE button.
23 6 01 11 Press PAUSE button.
24 6 13 AE Press PAUSE button.
25 6 01 D3 Press PAUSE button.
26 6 02 Check the data changes to “01”.
Note 5:
The adjustment data will be automatically input to
page: F, address: 3F, 40, 80, A9 and AA.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 0 03 00
2 6 01 00 Press PAUSE button.
3 6 13 00 Press PAUSE button.
4 6 2C 00
5 6 92 00
6 6 93 00
7 F
49
Set the data noted down at
4A
step 13, and press PAUSE
4B
button.
4C
8
Release the data setting
performed at step 3 .
(Refer to page 5-14)
9 0 01 00
10
Remove the C14 filter on the
lens.
10. Auto White Balance Adjustment
Adjust to the proper auto white balance output data. If it is not
correct, auto white balance and color reproducibility will be poor.
Mode CAMERA
Subject Clear chart
(Color reproduction adjustment
frame with the zoom lens at
WIDE end)
Filter Filter C14 for color temperature
correction
Measurement Point Displayed data of page: 1 (Note 3)
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address 3F, 40, 80, A9, AA
Specified Value R ratio: 28E0 to 2A20
B ratio: 5D60 to 5EA0
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2: Refer to “Picture Frame Setting” for YH and YL.
Note 3:
The right 4 digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Displayed data
Note 4:
“Auto White Balance Adjustment” is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1 Place the C14 filter on the lens.
2 0 01 01
3
Perform “Data setting during
camera system adjustments”.
(Refer to page 5-14)
4 6 2C 01
5 6 90 00
6 6 91 00
7 6 92 YL (Note 2)
8 6 93 YH (Note 2)
9 6 01 79 Press PAUSE button.
10 6 07 Check the data changes to “01”.
11 6 01 00 Press PAUSE button.
12 6 01 A7 Press PAUSE button.
13 F
49
Note down the data.
4A
4B
4C
14 F
49 29
Press PAUSE button.
4A 80
4B 5E
4C 00
15 6 01 A5 Press PAUSE button. (Note 5)
16 6 02 Check the data changes to “01”.
17 6 01 3F Press PAUSE button.
18 0 03 04
Ver. 1.1 2001. 08