Sony Cyber-shot DSC-S85, Service Manual

Page: 12 / 25

– 12 –
7. Light Level Adjustment
Adjust the standard LV value.
Mode CAMERA
Subject Clear chart
(Color reproduction adjustment
frame with the zoom lens at
WIDE end)
Measurement Point Displayed data of page: 1 (Note 3)
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address 26 to 28
Specified Value AE level: 0FC0 to 1040
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of the unit OFF/ON.
Note 2: Refer to “Picture Frame Setting” for YH and YL.
Note 3: The right 4 digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX

Displayed data
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2
Perform “Data setting during
camera system adjustments”.
(Refer to page 5-14)
3 6 2C 01
4 6 90 00
5 6 91 00
6 6 92 YL (Note 2)
7 6 93 YH (Note 2)
8 6 01 79 Press PAUSE button.
9 6 07 Check the data changes to “01”.
10 6 01 00 Press PAUSE button.
11 6 01 0D Press PAUSE button. (Note 4)
12 6 02 Check the data changes to “01”.
13 0 03 06
14 1
Check that the displayed data
(Note 3)
satisfies the AE level
specified value.
Note 4:
The adjustment data will be automatically input to
page: F, address: 26 to 28.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 0 03 00
2 6 01 00 Press PAUSE button.
3 6 2C 00
4 6 92 00
5 6 93 00
6
Release the data setting
performed atstep 2 .
(Refer to page 5-14)
7 0 01 00
8. Mixed Color Cancel Adjustment
To perform mixed color cancel adjustment based on data of each
color in color bar.
Mode CAMERA
Subject Color bar chart
(Color reproduction adjustment
frame with the zoom lens at
WIDE end)
Adjustment Page F
Adjustment Address A0 to A3
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of the unit OFF/ON.
Note 2: Refer to “Picture Frame Setting” for YH and YL.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2
Perform “Data setting during
camera system adjustments”.
(Refer to page 5-14)
3 6 2C 01
4 6 90 00
5 6 91 00
6 6 92 YL (Note 2)
7 6 93 YH (Note 2)
8 6 01 79 Press PAUSE button.
9 6 07 Check the data changes to “01”.
10 6 01 00 Press PAUSE button.
11 6 01 D7 Press PAUSE button.
12 6 01 D5 Press PAUSE button. (Note 3)
13 6 02 Check the data changes to “01”.
Note 3: The adjustment data will be automatically input to
page: F, address: A0 to A3.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 2C 00
3 6 92 00
4 6 93 00
5
Release the data setting
performed at step 2 . (Refer
to page 5-14)
6 0 01 00
Ver. 1.1 2001. 08