5-20
10. Color Reproduction Adjustment
Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
Mode
STILL
Subject
Color bar chart
(Color reproduction adjustment frame)
Adjustment Page
F
Adjustment Address
41 to 48, 5C to 5F
Note 1:
Perform “Auto White Balance Standard Data Input”
before this adjustment.
Note 2:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 5, address: F1, and set data: FF.
3)
Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.
4)
Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)
5)
Select page: 6, address: 01, set data: AB, and press the PAUSE
button.
6)
Select page: 6, address: 12, set data: 80, and press the PAUSE
button.
7)
Wait for 1 second.
8)
Select page: 6, address: 12, set data: 00, and press the PAUSE
button.
9)
Wait for 2 seconds.
10) Select page: 6, address: 01, set data: A9, and press the PAUSE
button. (The color reproduction adjustment is performed and
the adjustment data is stored in page: F, address: 41 to 48,
5C to 5F)
11) Select page: 6, address: 02, and check that the data is “01”.
Processing after Completing Adjustments:
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
2)
Select page: 5, address: F1, and set data: 00.
3)
Select page: D, address: 63, set data: 00, and press the PAUSE
button.
4)
Release the data setting performed at step 4).
(Refer to page 5-13)
5)
Select page: 0, address: 01, and set data: 00.
6)
Perform “Color Reproduction Check”.
