86
Your camera does not work.
•
Use the type of batteries you can use with this camera (page 92).
•
The battery level is low (The
E
indicator appears). Install new batteries or charged Nickel-
Metal Hydride batteries (
t
step 1 in
“Read This First”
).
The power is on, but the camera does not work.
•
The built-in microcomputer is not working properly. Remove the batteries, and then, after one
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
•
See page 16.
The lens gets fogged.
•
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 94).
The camera becomes warm when you use it for a long time.
•
This is not a malfunction.
The lens does not move when you turn off the camera.
•
The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
(
t
step 1 in
“Read This First”
) or use the AC Adaptor (not supplied).
The Clock Set screen appears when you turn on the camera.
•
Set the date and time again (
t
step 2 in
“Read This First”
).
Others
