Sony Cyber-Shot DSC-RX10M4, Help Manual

Page: 107 / 593

Help Guide
Digital Still Camera
DSC-RX10M4
Self-timer
Shoots an image using the self-timer after a designated number of seconds have elapsed since the shutter button was
pressed. Use the 5-second/10-second self-timer when you are going to be in the picture, and use the 2-second self-timer
to reduce camera-shake caused by pressing the shutter button.
Menu item details
The mode determines the number of seconds until a picture is taken after the shutter button is pressed.
Self-timer: 10 Sec
Self-timer: 5 Sec
Self-timer: 2 Sec
Hint
Press the shutter button again to stop the count of the self-timer.
Select MENU → (Camera Settings1) → [Drive Mode] → [Single Shooting] to cancel the self-timer.
Set [Audio signals] to [Off] to mute the beep sound during self-timer counting.
To use the self-timer in bracket mode, select bracket mode under drive mode, then select MENU → (Camera Settings1) →
[Bracket Settings] → [Selftimer during Brkt].
Note
The self-timer is unavailable in the following situations:
The shooting mode is set to [Sweep Panorama].
[Sports Action] under [Scene Selection]
[Smile Shutter]
Related Topic
Audio signals
4-725-901-11(2) Copyright 2017 Sony Corporation
MENU → (Camera Settings1) → [Drive Mode] → [Self-timer].
1
Select the desired mode using the right/left side of the control wheel.
2
Adjust the focus and shoot the image.
The self-timer lamp flashes, a beep sounds, and a picture is taken after the designated number of seconds have
elapsed.
3
107