Sony Cyber-shot DSC-HX20, User Manual

Page: 252 / 274

Cyber-shot User Guide
Print
Search
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Troubleshooting > Warning indicators and messages > Messages
Messages
If the following messages appear, follow the instructions.
●
The battery level is low. Charge the battery pack immediately. Depending on the conditions of use or the type of battery
pack, the indicator may flash even though there are still 5 minutes to 10 minutes of remaining battery time left.
For use with compatible battery only
●
The battery inserted is not an NP-BG1 or NP-FG1 type battery pack.
Camera overheating Allow it to cool
●
The camera temperature has risen. The power may turn off automatically, or you may be unable to record movies. Leave
the camera in a cool location until the temperature goes down.
Internal memory error
●
Turn the power off and then on again.
Reinsert the memory card.
●
The inserted memory card cannot be used in the camera. [Details]
●
The terminal section of the memory card is dirty.
●
The memory card is damaged.
This memory card is not formatted correctly.
●
The inserted memory card cannot be used in the camera. [Details]
This memory card may not be able to record or play images correctly.
●
The inserted memory card cannot be used in the camera. [Details]
Buffer overflow. Writing to the media was not completed in time.
●
If you use a memory card that has been recorded and erased repeatedly, or that was formatted on a different camera,
the data writing speed may be too slow. First back up any data on the card to a computer, and then reformat the card
before using it. [Details]
●
The writing speed of the memory card you are using is not sufficient for movie recordings. Use a “ Memory Stick PRO-HG
Duo ” media, “ Memory Stick PRO Duo ” (Mark2) media, or an SD card (Class 4 or faster).
The memory card is locked. Check the tab.
●
You are using the memory card with the write-protect switch, and the switch is set to the LOCK position. Set the switch to
the recording position.
This is a read- only memory card.
●
The camera cannot record or delete images on this memory card.
Writing to the memory card was not completed correctly Recover data
252