Ad
d
iti
o
n
a
l in
fo
rma
tio
n
23
[RECEIVE] in the
Bluetooth menu cannot be
selected.
• The MODE dial is not set to
.
• No “Memory Stick” is inserted.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
• The capacity of the “Memory Stick” is
insufficient.
p
Set the MODE dial to
(see the operating instructions).
p
Insert a “Memory Stick” (see the operating instructions).
p
Set the write-protect switch to the recording position (see the
operating instructions).
p
Delete the images saved in the “Memory Stick,” or format it
(see the operating instructions).
p
Replace the “Memory Stick” (see the operating instructions).
You cannot receive an
image from the desired
device.
• The sent file is not a JPEG file.
• The capacity of the “Memory Stick” is
insufficient.
• The sent file is too large.
• The device is placed outside of radio wave
range.
• The antenna portion of your camera or the
device is covered with your hand etc.
• The desired device is now connecting to another
device.
• Passkey authentication has failed.
• The device you intend to connect to is different
from the currently selected.
p
Send the JPEG file.
p
Delete the images saved in the “Memory Stick,” or format it
(see the operating instructions).
p
Replace the “Memory Stick” (see the operating instructions).
p
Large size files may not be acceptable.
p
Move the device closer to your camera.
p
Do not cover the antenna portion (page 4).
p
Wait until the connection is finished and perform a new search
(page 7).
p
Connect again and enter the same passkey both on your camera
and the device (page 17).
p
Check the name on the SELECT THE RECEIVER screen.
Symptom
Cause
Solution
