Sony Cyber-shot DSC-F77 Operating Instructions Manual Download Page 85

Page: 85 / 116

oub

lesh

oot

The battery remaining
indicator is incorrect. Or
the sufficient battery
remaining indicator is
displayed but the power
runs out soon.

• You have used the camera for a long time in an

extremely hot or an extremely cold location.

• The battery pack is dead (page 105).
• The battery pack is discharged.
• A mismatch has occurred in the remaining

battery time information.

—

Replace the battery pack with a new one.

Replace the battery pack with a charged one (page 11).

Fully charge the battery pack (page 11).

The battery pack runs
down too quickly.

• You are shooting/viewing images in an

extremely cold location.

• The battery pack is not charged enough.
• The battery pack is dead (page 105).

—

Fully charge the battery pack (page 11).

Replace the battery pack with a new one.

The power cannot be
turned on.

• The battery pack is not installed properly.
• The camera is not properly installed to the USB

cradle.

• The AC power adaptor is disconnected.

• The battery pack is dead (page 105).
• The battery pack is not charged enough.

Properly install the battery pack (page 11).

Properly install the camera (page 12).

Connect the AC power adaptor securely to the camera
(page 15).

Replace the battery pack with a new one.

Fully charge the battery pack (page 11).

The power turns off
suddenly.

• If you do not operate the camera for about 90

seconds while the power is on, the camera turns
off automatically to prevent wearing down the
battery (when [POWER SAVE] is [OFF], after
three minutes.) (page 16).

• The battery pack is discharged.
• The camera is not properly installed to the USB

cradle.

Turn on the power again (page 16).

Replace the battery pack with a charged one (page 11).

Properly install the camera (page 12).

Symptom

Cause

Solution

Summary of Contents for Cyber-shot DSC-F77





















































































































Search results

Summary of Contents for Cyber-shot DSC-F77

Reviews:

Related manuals for Cyber-shot DSC-F77

Brands by name

Popular brands

Sony Cyber-shot DSC-F77, Operating Instructions Manual

Search results

Summary of Contents for Cyber-shot DSC-F77

Reviews:

Related manuals for Cyber-shot DSC-F77

Brands by name

Popular brands