76
c
Make sure the USB ON/OFF
switch is set to “ON” and
connect the supplied USB
cable to the (USB) jack of
the USB cradle.
d
Connect the USB cable to your
computer.
•
When using a desktop computer, connect the
USB cable to the USB connector on the rear
panel.
e
Install the camera to the USB
cradle and turn on the camera.
•
Make sure the camera is securely installed
to the USB cradle.
•
When using Windows XP, the AutoPlay
wizard automatically appears on the
desktop. Proceed to page 79.
“USB MODE NORMAL” appears on
the LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
•
If “USB MODE NORMAL” does not appear,
confirm that [USB CONNECT] is set to
[NORMAL] in the SET UP settings (page 102).
• During the USB connection, do not
switch the USB ON/OFF switch or not
remove the camera from the USB
cradle. The data may be corrupted.
When you cancel the USB connection,
see “
*
During communication, the access indicators
turn red.
USB cable
USB ON/OFF switch
USB MODE
NORMAL
Access
indicators*