Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
On ( )
The zoom (p. 36) moves to the top of the T
(telephoto) side automatically and allows
recording subjects at close range down to the
following distances:
HDR-PJ10E/XR160E: About 44 cm
(17 3/8 in.)
HDR-CX360E/CX360VE/PJ30E/PJ30VE/
PJ50E/PJ50VE: About 25 cm (9 7/8 in.)
Notes
When recording a distant subject, focusing may
be difficult and can take some time.
Adjust the focus manually ([Focus], p. 79) when
it is hard to focus automatically.
SteadyShot
You can compensate for camera shake.
Set [
SteadyShot] to [Off] (
) when
using a tripod (sold separately), then the
image becomes natural.
Active
Provides a more powerful SteadyShot effect.
Standard
Provides a SteadyShot effect, performing
wide-angle recording under relatively stable
recording conditions.
Off (
)
The SteadyShot function is not used.
Notes
If you change the setting of [
SteadyShot],
the imaging field will also change accordingly.
You can magnify images up to the following
levels using optical zooming, unless
[
SteadyShot] is set to [Active].
HDR-PJ10E/XR160E:
Up to 30 times the original size
HDR-CX360E/CX360VE/PJ30E/PJ30VE/
PJ50E/PJ50VE:
Up to 12 times the original size
SteadyShot
You can compensate for camera shake.
Set [
SteadyShot] to [Off] (
) when
using a tripod (sold separately), then the
image becomes natural.
On
The SteadyShot function is used.
Off (
)
The SteadyShot function is not used.
Digital Zoom
You can select the maximum zoom level.
Note that the image quality decreases when
you use the digital zoom.
Off
HDR-PJ10E/XR160E: Up to 42× zoom is
performed.
HDR-CX360E/CX360VE/PJ30E/PJ30VE/
PJ50E/PJ50VE: Up to 17× zoom is
performed.
The zooming zone appears when you set the
maximum zoom level.
