EN
19
Chapter 6: Additional Features
To hear the VCR sound through the
connected speakers, connect the PC/MD IN
jacks on the rear panel of the stereo to the
output jacks on the VCR. In this case,
connect the plugs to jacks of the same
colours.
For details, see the instruction manual for
each equipment.
To listen to the sound of the
connected equipment
Press FUNCTION repeatedly until “PC”
(or MD) appears in the display.
Connecting an External
Antenna
To improve the FM reception
Connect an external antenna when the
signal reception is too weak with the
supplied FM lead antenna.
Connect an external FM antenna to the FM
75
Ω
terminal, using a 75-ohm coaxial cable.
To improve the AM reception
Connect an external antenna if the signal
reception is too weak after reorienting the
supplied AM loop antenna. Do not
disconnect the AM loop antenna.
Connect a 6- to 15-meter insulated wire (not
supplied) to the AM terminal and extend
the other end horizontally at a higher place.
Connect the
y
terminal to the earth.
Important
Earth the external antenna against lightning.
To avoid a gas explosion, do not connect the
earth wire to a gas pipe.
To cancel the timer
Press TIMER SELECT repeatedly until
“OFF” appears in the display instead of
“REC”.
To set the timer with the same items
Press TIMER SELECT to display “REC”,
and press POWER to turn off the system.
Once you set the timer, you do not have to
set the same items again.
To check the timer settings
Press TIMER SELECT until “REC”
disappears and appears in the display
again.
The preset items appear sequentially.
To change timer settings
Repeat steps 1 to 10.
Connecting Optional
Equipment
Connecting an MD, DAT
deck, etc.
To make a digital recording with an
MD, DAT deck, etc.
Connect the DIGITAL (OPTICAL)
OUTPUT jack on the rear panel of the tuner
CD player to a recorder, deck, etc. that has
an optical connector.
To make an analog recording with an
MD, DAT, VCR deck, etc.
Connect the PC/MD IN/OUT jacks (phono
jacks) on the rear panel of the stereo to an
MD, DAT, VCR deck, etc. with the Sony
RK-C315 connecting cord (not supplied).
MD/DAT
deck
Tuner CD
player
CD OPTICAL
DIGITAL OUT
to digital
input jack
Digital cable POC-15A
(not supplied), etc.
MD/DAT/
VCR deck
to the output
jacks
Tuner CD
player
to the
input jacks
Connecting cord RK-C315
(not supplied), etc.
Insulated wire
(not supplied)
Earth wire
(not supplied)
