Sony CMT-SP55TC Operating Instructions Manual Download Page 41

Page: 41 / 44

Additional Information

Optional Components

There is no sound.

• Refer to General item “There is no sound.” on

page 39 and check the condition of the
system.

• Connect the component properly (see page

34) while checking:
– if the cords/cables are connected properly.
– if the cord/cable connectors are firmly

inserted all the way.

• Turn on the connected component.
• Refer to the operating instructions included

with the connected component and start
playing.

The sound is distorted.

• Attenuate the distortion (see page 35).

The sound from the component connected
to the AUX IN jacks is not heard.

• Turn FUNCTION until “AUX” appears.
• Connect the audio cord securely.

If the system still does not
operate properly after
performing the above measures,
reset the system as follows:

Unplug the mains lead.

While holding down

@/1

, connect the mains

lead to the mains.

The system is reset to the factory settings. All the
settings you made such as the preset stations,
clock, timer and CD disc titles are cleared. You
should set them again.

Messages

One of the following messages may appear or
flash in the display during operation.

Name Full

There are already 50 disc titles stored in the
system.

- OVER -

You have reached the end of the CD while
keeping pressing

on the CD player

during pause.

Cannot Edit

You tried to label a CD TEXT disc.

TAPE

Cannot SYNC

• There is no tape in the tape deck, or the tab

has been removed from the cassette.

• The tabs and the direction setting do not

match.

No TAB

You cannot record the tape because the tab has
been removed from the cassette.

No Tape

There is no tape in the tape deck.

Summary of Contents for CMT-SP55TC













































Search results

Summary of Contents for CMT-SP55TC

Reviews:

Related manuals for CMT-SP55TC

Brands by name

Popular brands

Sony CMT-SP55TC, Operating Instructions Manual

Search results

Summary of Contents for CMT-SP55TC

Reviews:

Related manuals for CMT-SP55TC

Brands by name

Popular brands