background image

31

Timer/Other Features

To cancel the procedure

Press CLOCK/TIMER SET.

To change the setting

Start over from step 1.

To check the setting/activate
the timer

Press CLOCK/TIMER SELECT and press 

.

or 

>

 repeatedly until “SEL DAILY” appears.

Then press ENTER/YES.
It is not necessary to set the start and stop times
every time.

To cancel the timer

Press CLOCK/TIMER SELECT and press 

.

or 

>

 repeatedly until “TIMER OFF” appears.

Then press ENTER/YES.

Notes

• You cannot activate Daily Timer and recording

timer at the same time.

• Do not operate the system from the time the system

turns on until the play starts (about 30 seconds
before the preset time).

• If the system is on at the preset time, the set sound

source starts playing.

continued

Timer recording radio
programmes

To timer record, you must first preset the radio
station (see page 24) and set the clock (see
page 8). You can make a timer recording of a
radio programme or the audio signal from a
component connected to AUX IN (see page 35).

`/1

3–6

3–6

3–6

2

8

1

Prepare the sound source you want to
play.

• Radio: Tune in the preset radio station (see

page 25).

• AUX: Set the timer of the component

connected to AUX IN. For details, refer to
the operating instructions of the connected
component.

2

Press CLOCK/TIMER SET.

3

Press 

.

 or 

>

 repeatedly until

“SET TAPE REC” (or “SET MD REC”
when using the optional MD deck
MDS-SP55) appears, then press
ENTER/YES.

The hour indication flashes.

Summary of Contents for CMT-SP55TC













































Reviews: