25
Tuner
To tune in a station with a weak
signal
1
Press TUNING MODE repeatedly until
“MANUAL” appears in step 3.
2
Press
m
or
M
repeatedly to tune in the
station and continue from step 5.
To set another station to the
exist preset number
Start over from step 2.
To change the AM tuning
interval (except for the European
model)
The AM tuning interval is factory-set to 9 kHz (10
kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off
the system. While holding down the
button, turn the system back on. When you change
the interval, all the AM preset stations are erased.
To reset the interval, repeat the same procedure.
Tips
• When a new station is memorized, the station
formerly memorized at that preset number is erased.
• The preset stations are retained for about a week
even if you disconnect the mains lead or if a power
failure occurs.
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see page 24).
To turn on the system, press
?/1
(power).
?/1
(power)
`/1
2
1
3
3
1
Press BAND TUNER repeatedly to
select “AM” or “FM”.
2
Press TUNING MODE repeatedly until
“PRESET” appears.
continued
