![background image](http://html.mh-extra.com/html/sony/cmt-sbt300w/cmt-sbt300w_operating-instruction_420443028.webp)
28
GB
ON:
to receive in AAC codec format
OFF:
to receive in SBC codec format
Notes
•
If you initiate setup during BLUETOOTH
connection, the connection is cut.
•
When using an Apple product, update it to the
latest software version. For details on updating,
refer to the operation manual supplied with your
Apple product.
•
If sound is interrupted during reception in AAC
codec format, set the BT AAC menu to “OFF.”
Pairing the system with a
BLUETOOTH device
Connection example
* Check if your WALKMAN is a BLUETOOTH device
or not, referring to the operation manual
supplied with your WALKMAN.
1
Place the BLUETOOTH device to
be connected within 1 meter
from the system.
2
Press BLUETOOTH FUNCTION
.
Press FUNCTION
on the unit
repeatedly until “BT AUDIO” appears in
the display
.
The BLUETOOTH indicator flashes
slowly in blue.
•
If the system has been automatically
connected with the BLUETOOTH
device in the past, press BLUETOOTH
on the unit to cancel the
connection so that “BT AUDIO”
appears in the display
.
3
Press and hold BLUETOOTH
on the unit for 2 seconds or
longer.
The BLUETOOTH indicator flashes
quickly in blue and “PAIRING” flashes in
the display
.
The system is in Pairing mode.
4
Perform the pairing operation on
the BLUETOOTH device and
search for this system with the
BLUETOOTH device.
When searching has finished, a list of
the devices found may appear on the
BLUETOOTH device display.
•
This system appears as “SONY:CMT-
SBT300W (Bluetooth)” or “SONY:CMT-
SBT300WB (Bluetooth).” If it does not
appear, perform the procedure from step 1
again.
BLUETOOTH device such as a
“WALKMAN”*