![background image](http://html.mh-extra.com/html/sony/cmt-sbt300w/cmt-sbt300w_operating-instruction_420443027.webp)
27
GB
Oper
a
tions
Preparing for a BLUETOOTH connection
You can listen to music from your iPod/
iPhone/iPad or BLUETOOTH device over a
wireless connection.
Before using the BLUETOOTH function,
perform pairing to register your BLUETOOTH
device.
The system supports registration and
connection of the BLUETOOTH device and
NFC, which enables data communication by
just touching a specified location. For
details on NFC, see “Connecting by one-
touch action (NFC)” (page 29).
What is pairing?
The BLUETOOTH devices to be connected
must be registered with each other
beforehand. Pairing is an operation of
registering two devices.
Once a pairing operation is performed, it
does not have to be performed again. In the
following cases, however, a pairing
operation must be performed again:
•
Pairing information was erased when the
BLUETOOTH device was repaired.
•
You attempt to pair the system with more
than 10 BLUETOOTH devices.
This system can pair with up to 9
BLUETOOTH devices. If you pair another
BLUETOOTH device after pairing with 9
devices was performed, pairing
information of the device that was
connected with the system first is
overwritten with that of the new device.
•
Pairing registration information of this
system is erased from the connected
device.
•
If you initialize the system or erase the
pairing history with the system, all the
pairing information will be erased.
About the BLUETOOTH indicator
The BLUETOOTH indicator in the center of
the BLUETOOTH button
allows checking
of the BLUETOOTH status.
This system supports BLUETOOTH A2DP
(Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control
Profile). For details, see “BLUETOOTH
wireless technology” (page 71).
Notes
•
For details on operations of the BLUETOOTH
device to be connected, refer to the operation
manual supplied with your BLUETOOTH device.
•
The BLUETOOTH device to be connected must
support A2DP (Advanced Audio Distribution
Profile).
Enabling reception of AAC codec
You can receive data in AAC codec format
from a BLUETOOTH device. To enable
reception, set up using the option menu.
1
Press OPTIONS
to display the setting
menu.
2
Press
/
repeatedly to select “BT
AAC” then press
.
3
Press
/
repeatedly to select “ON” or
“OFF,” then press
.
System status
Indicator
color
Indicator
status
The system is in
BLUETOOTH
Standby (when
the system is on)
Blue
Flashes slowly.
During
BLUETOOTH
pairing
Blue
Flashes
quickly.
The system is
attempting to
connect with a
BLUETOOTH
device
Blue
Flashes.
The system has
established
connection with
a BLUETOOTH
device
Blue
Lit.