![background image](http://html.mh-extra.com/html/sony/cmt-md1-micro-hi-fi-component-system/cmt-md1-micro-hi-fi-component-system_operating-instructions-manual_420409032.webp)
32
Recording the favorite CD tracks
on an MD (continued)
Recording on an
MD manually
The system automatically locates the end of
any recorded portion of an MD and starts
recording from that point.
7
Press CD-MD SYNC.
The MD stands by for recording and the
CD is in pause for playback. If you use
an MD with tracks already recorded on
it, the system automatically locates the
end of the recorded portion and starts
the new recording from there.
8
Press MD
^
.
Recording starts from the last recorded
portion of the MD. The CD stops and
the MD pauses automatically when the
recording is completed. If there is no
remaining recording time on the MD, the
MD stops.
To stop recording
Press MD
p
.
If the MD ends while recording, the MD and
the CD automatically stop.
Tip
The MD is labeled with the disc title of the CD (see
page 25) when using a new recordable MD or an
MD whose tracks have been completely erased (see
page 41) (Disc Memo Copy function).
While “TOC” is lit or is flashing
To ensure complete recording, do not move
the system or disconnect the power cord. The
system updates the Table of Contents (TOC)
while “TOC” is flashing.
Notes
• The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
– Remove the MD.
– Press
1/u
to turn off the system.
• If the MD is record protected, “MD Protected”
appears in the display and the MD cannot be
recorded on. Press MD
6
and remove the MD,
slide the record protection tab to the closed
position (see page 30), reinsert the MD and try
again.
• Please do not use MDs with labels that are
protruding or labels that have not been positioned
correctly. Use of such MDs may damage this
system.
(P
1/u
=
0
–
p
)
+
+
(P
p
g
+
–
6
MD
6
4
3
MD
p
2
MD indicator
=
+
–
+
–
+
=
+
(
P
p
DISPLAY
1
Insert a recordable MD.
If the MD indicator lights up blue,
another MD is already inserted, press
MD
6
and remove the MD.
2
Press FUNCTION to select the
source (e. g., CD) you want to
record.
• CD: Recording from the CD.
• TUNER: Recording from the radio.
• TAPE: Recording from other
components.
Summary of Contents for CMT-MD1 - Micro Hi Fi Component System
Page 61: ...61 Additional Information ...