manualshive.com logo in svg

Sony CMT-F3MD, Operating Instructions Manual, Page: 50 / 64

Share
Download
Sony CMT-F3MD Operating Instructions Manual Download Page 50

50

Tips

• The 

A

 and 

B

 markings of the TAPE IN/OUT

jacks guide you to connect the optional TC-TX373
tape deck.

• Operate the tape deck using the same procedures as

for the DHC-MD373 as described under
“Operations” (pages 7 to 13) of the TC-TX373
operating instructions.

• The remote controller buttons that can be used to

operate the tape deck with the CMT-F3MD are as
follows.
–

)/1

 (power) switch

–

N

 (play) button

–

x

 (stop) button

–

X

 (pause) button

–

m/M

 (fast-forward/rewind) button

– TAPE button
– VOL +/– buttons

• Switch the function to “TAPE” when listening to or

recording the sound of the TC-TX373 tape deck.

Connecting another tape deck,
etc.

Connect a tape deck, etc., to the TAPE IN and
OUT jacks on the rear panel of the unit, using
audio connecting cords (not supplied).

Tip

Switch the function to “TAPE” when listening to or
recording the sound of the connected components.

Connecting optional
components

Connecting optional A/V
components

To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.

Connecting the audio cords (not
supplied)

When using audio cords (not supplied) to connect
other A/V components to the system, make sure to
insert the plugs firmly, pushing them in all the
way. No sound will be produced if the plugs are
not inserted securely.

Connecting the optional
TC-TX373 tape deck (except for
Taiwan model)

The TC-TX373 is a tape deck made specially for
the DHC-MD373/333, but it can also be used with
the CMT-F3MD. The connections and operation
are the same as when connected to the DHC-
MD373.
CD Synchro Recording and Timer Recording are
possible when the TAPE CONTROL jacks are
connected.
Refer to the operating instructions included with
the TC-TX373 tape deck for details.
Refer to the illustration below and connect the
tape deck using the same procedures as for the
DHC-MD373 as described under“Connection to
the DHC-MD373/333” (pages 4 to 7) of the
TC-TX373 operating instructions.

TAPE CONTROL jack

Insert completely

Not pushed in all the way

N.G.

OK

TAPE IN
jacks

Tape deck, etc.

System
cable
adaptor

TAPE
OUT jacks

To the audio
input of a
component

To the audio
output of a
component

Summary of Contents for CMT-F3MD

































































Reviews:

No comments