46
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain
time, so that you can fall asleep to music. You can
preset the time to turn off in 10 minutes
increments.
SLEEP
,
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes as
follows:
t
SLEEP OFF
t
AUTO
10min …
T
80min
T
90min
T
If you select “AUTO”
The system turns off after 100 minutes.
The system also turns off automatically when the
current CD or MD finishes playing.
To check the turn-off time
Press SLEEP once.
To change the time to turn off
Select the time you want by pressing SLEEP.
To cancel the Sleep Timer
function
Press SLEEP repeatedly until “SLEEP OFF”
appears.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
Note
Do not set to “AUTO” during CD-MD Synchro
Recording.
8
Repeat steps 5 to 7 to complete the
entire title.
If you made a mistake
Press CURSOR
T
or
t
until the character
you want to change flashes, then repeat steps
5 to 7.
To erase a character
Press CLEAR on the remote while the
character is flashing. You cannot insert
characters.
9
Press ENTER/YES on the remote to
complete the labelling procedure.
The station name is stored in the system
memory.
To cancel labelling
Press MENU/NO on the remote.
Tip
In step 5 you can enter a space directly by pressing
SPACE without selecting
(blank space).
To check the preset number and
frequency
The station name appears when you tuned the
labelled station.
To check the preset number and frequency, press
DISP on the remote. The preset number and
frequency are displayed for 4 seconds and it
returns to the station name display.
To erase the name
1
Repeat steps 1 to 4.
2
Press CLEAR on the remote repeatedly to erase
the name.
3
Press ENTER/YES on the remote.
Labelling the preset stations
(continued)