![background image](http://html.mh-extra.com/html/sony/cmt-f3md/cmt-f3md_operating-instructions-manual_420340037.webp)
The MD Deck
—
Editing
37
1
Press MD to switch the function to MD.
2
Press MENU/NO to display “Edit
Menu”.
3
Press
.
or
>
repeatedly until
“Track Erase ?” appears, then press
ENTER/YES.
4
Press
.
or
>
repeatedly until the
desired track number appears.
5
Press ENTER/YES.
“Complete !!” appears for a few seconds and
the selected track and title are erased.
To cancel erasing
Press MENU/NO.
To return to the condition before
Track Erase
You can return to the original condition
immediately after erasing the track by using the
Undo function (see page 43).
Note
“Erase???” appears when the track was recorded or
edited on another deck and is protected. To erase the
track, press ENTER/YES while “Erase???” appears.
continued
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily. You can restore the contents to
the condition before erasing (unerase) by using the
Undo function. Note, however, you cannot undo
an edit after performing any additional edits.
The three options for erasing recordings are:
• Erasing a single track. (Track Erase)
• Erasing all tracks. (All Erase)
• Erasing a portion of a track. (A-B Erase)
Erasing a single track (Track
Erase Function)
You can erase a track simply by selecting its track
number. When you erase a track, the total number
of tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Eg.: Erasing track 2.
1
2
3
1
2
3
4
A
A
C
D
B
C
D
Erase track 2
Track
number
Original
tracks
After
Track
Erase
When erasing multiple tracks, you should proceed
in order from high to low track number to prevent
the renumbering of tracks that have not been
erased yet.
3,5
3,4
3,4
2
1