background image

CMT-EH55DAB.GB.3-874-280-11(1)

1

GB

Basic Oper

ations

Listening to music of 

an USB device

You can listen to music stored in the USB 

device.
The audio format that can be played back 

by this system is MP3*.

See “Playable USB devices with this 

system” (page 32) for a list of USB devices 

that can be connected to this system.

*

  Files with copyright protection (Digital 

Rights Management) cannot be played by 

this system. 

Files downloaded from an online music store 

may not be played by this system.

Select the USB function.

Press USB (or FUNCTION 

repeatedly) 

.

Connect an optional USB device 
to the   (USB) port 

.

When the USB device is connected, 

the display changes as follow: 

“READING” 

 “1*”

*When connecting the USB device, “1” 

(volume label) is displayed next if 

recorded.

Note

It may take about 10 seconds before 

“READING” appears depending on the 

type of USB device connected.

Start playback.

Press 

 (or USB 



 on the unit) 

.

Adjust the volume.

Press /

 (or turn the 

VOLUME control on the unit) 

.

Other operations

To 

Press

Pause playback USB 



 

 on the 

unit. To resume play, 

press the button again*.

Stop playback

 

.

Select a folder

 +/

 

.

Select a file

/

 

.

Select Repeat 

Play

REPEAT 

 repeatedly 

until “REP,” “

 REP” 

or “REP1” appears.

*

  When playing a VBR MP3 file, the system 

may resume playback from a different point.

Notes on the USB device

 Some time may be needed to start playback 

when:

  the folder structure is complex.

  the memory capacity is excessive.

 When the USB device is connected, the 

system reads all the files on the USB device. 

If there are many folders or files on the USB 

device, it may take a long time to finish 

reading the USB device.

 Do not connect the system and the USB 

device through an USB hub.

 With some connected USB devices, after an 

operation is performed, there may be a delay 

before it is performed by this system.

 This system does not necessarily support all 

the functions provided in a connected USB 

device.

 The playback order for the system may differ 

from the playback order of the connected 

USB device.

 Do not save other types of files or unnecessary 

folders on an USB device that has audio files.

 Folders that have no audio files are skipped.

 The maximum number of audio files and 

folders that can be contained on a single USB 

device is 999 (including the “ROOT” folder). 

The maximum number of audio files and 

folders may vary depending on the file and 

folder structure.

Continued 

Summary of Contents for CMT-EH55DAB

































Reviews: