background image

CMT-EH55DAB.GB.3-874-280-11(1)

1

GB

Recording onto a tape

Use a TYPE I (normal) tape only. 

You can record just the portions you like 

from a sound source, including the USB 

device or connected audio components.

Use buttons on the unit to control tape 

recording.

Insert a recordable tape.

Press 

 

 

, and insert the tape 

into the cassette holder with the side 

you want to record facing forward.

Prepare the recording source.

Select the desired source to record.

Place the disc you want to record.

When recording a folder from an

MP3 disc, press PLAY MODE 

 

repeatedly to select “

” and then 

press 

 +/

 

 repeatedly to select 

the desired folder.

To record only your favorite CD 

tracks or MP3 files in your desired 

order, perform steps 2 to 5 of 

“Creating your own program” (page 

20).

Start recording.

Press 

 

.

The CD starts playing automatically.

When recording from a connected 

USB device or audio component, start 

playing desired recording sources 

manually.

To stop recording, press 

 

 

.

Notes

 If there is noise while recording from the 

tuner, reposition the appropriate antenna to 

reduce the noise.

 While recording, you cannot listen to other 

sources.

 Do not turn off the system during recording.

Tip

We recommend that you press 

 

 first, 

and then press 

 

 

 to avoid noise being 

recorded when you stop recording.

Summary of Contents for CMT-EH55DAB

































Reviews: