![background image](http://html.mh-extra.com/html/sony/cmt-cp11/cmt-cp11_service-manual_420288012.webp)
11
SECTION 4
SERVICE MODE
Start
REC pause for 3 seconds
FWD REC
Fast forward
REV Play
REC pause for 3 seconds
REV REC
Rewind
FWD Play
Shut off
Shut off
Shut off
Shut off
1 minute
3 minutes
1 minute
3 minutes
Start
Open the disc tray
Close the disc tray
Play the last track
[Liquid Crystal Display All Lit Check Mode]
Procedure:
1.
Set to standby state.
2.
Press three buttons of
x
(TAPE),
x
(CD), and MD/VIDEO
simultaneously.
3.
Liquid crystal display are all turned on.
4.
To exit from this mode, press the
?/1
button to turn the power
OFF.
[Tape Deck Aging Mode]
This mode can be used for operation check of tape deck section.
Procedure:
1.
Set a tape in the tape deck.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and TAPE
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
?/1
button to turn the
power OFF.
Aging mode sequence:
[CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1.
Load a CD disc.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and TUNER
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
?/1
button to turn the
power OFF.
Aging mode sequence:
Summary of Contents for CMT-CP11
