CMT-BT60/BT60B/BT80W/BT80WB
12
2-5. CD MECHANISM DECK BLOCK
1
Solder the short-land.
Solder is removed cleanly.
Solder is not removed.
Note 2:
When assembling the CD
mechanism deck block,
remove the solder of
short-land after connecting
all flexible flat cable
and
connector.
Note 1:
Before disconnecting all flexible flat cable and connector of CD mechanism deck block, solder the short-land.
5
flexible flat cable (24P)
(CN501)
4
flexible flat cable (7P)
(CN831)
7
CD mechanism deck block
3
Remove the CD mechanism
deck block in the direction
of an arrow.
6
connector
(CN502)
OK
NG
– Front top view –
2
two screws
(BVTP3
u
10)
2
two screws
(BVTP3
u
10)
Note 3:
When installing the flexible flat cable, ensure the colored line.
No slanting after insertion.
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat
cable
flexible flat
cable
connector
connector
OK
NG
Note 4:
When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG