CMT-BT60/BT60B/BT80W/BT80WB
28
SECTION 3
TEST MODE
COLD RESET
It can clears all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press two buttons of the [
x
] and [
?
/
1
] simultaneously.
3. The message “RESET” (CMT-BT60/BT60B) or “ALLRESET”
(CMT-BT80W/BT80WB) is displayed on the liquid crystal
display, then becomes the standby state.
AUTO STANDBY TEST
It can con
fi
rm the auto standby function operates normally.
The auto standby function operates in 60 seconds in this mode.
(Usually, it takes 30 minutes)
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [FUNCTION] button to turn except “FM”, “AM”
and “DAB”.
3. Press two buttons of the [BASS BOOST] and [FUNCTION]
simultaneously for three seconds.
4. It enters the auto standby test mode, and the following screen
is displayed on the liquid crystal display.
(In this mode, “ST” continues blinking on the liquid crystal
display)
Signal level
(0 or 1)
Countdown
timer
(60 to 0)
ST
ST
Screen display
5. In the case of the following states, the countdown timer de-
creases. This unit will become standby states if the countdown
timer decreases to “0”.
• Operation is not performed.
• The signal level is lower than threshold.
Releasing method:
Press two buttons of the [BASS BOOST] and [FUNCTION] si-
multaneously for three seconds.
COMMON TEST
It can con
fi
rm the MAX/MIN of volume and
fl
at of equalizer.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press two buttons of the [BASS BOOST] and [
u
] simultane-
ously for three seconds.
3. It enters the common test mode.
(In this mode, “
c
PLAY” and
“SLEEP” continues blinking on
the liquid crystal display)
4. When pressing the [VOL +]/[VOL
−
] button, the message is
changed with VOL MIN
↔
VOL 17
↔
VOL MAX on the
liquid crystal display.
Releasing method:
Press the [
?
/
1
] button to turn the power off.
PANEL TEST
It can con
fi
rm the liquid crystal display, LEDs, model name, desti-
nation, software version and button.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press two buttons of the [FUNCTION] and [VOL –] simulta-
neously for three seconds.
3. It enters the panel test mode, and all segments on the liquid
crystal display and all LEDs light up.
Screen display
c
PLAY
c
REC UPDATE
FLDR SHUFPGM
1
SLEEP ST
NX
REC
4. When pressing the [
>
TUNE +] button, the model name and
destination are displayed on the liquid crystal display alter-
nately.
(In this mode, “ST” continues blinking on the liquid crystal
display)
Screen display
Screen display
ST
ST
Model Name
Display
CMT-BT60
HFX-185
CMT-BT60B
HFX-186
CMT-BT80W
HFX-182
CMT-BT80WB
HFX-183
Destination
Display
US and Canadian
NA
AEP and UK
CE2
5. When pressing the [
>
TUNE +] button again, the MC ver-
sion is displayed on the liquid crystal display.
6. Each
time
[
>
TUNE +] button is pressed, the display chang-
es MCS version, MTK version, NWM version (CMT-BT80W/
BT80WB only), BTM version, GC version, USBL version,
NWA version (CMT-BT80W/BT80WB only), NWD version
(CMT-BT80W/BT80WB only), BTA version, BTL version,
CD version, CDMA version, CDMB version, ST version, TA
version and TM version this order, and returns to the MC ver-
sion display.
7. When pressing the [
x
] button while the each version is dis-
played, year, month and day of the software creation is dis-
played. When pressing the [
x
] button again, the display re-
turns to the each version display.
8. In the state of step 3, when pressing the [
.
TUNE
−
] button,
“K 0” is displayed on the liquid crystal display.
9. Each time a button is pressed, “K” value increases. However,
once a button is pressed, it is no longer taken into account.
When pressing the all buttons, display becomes “K12”.
Releasing method:
Press two buttons of the [FUNCTION] and [VOL –] simultane-
ously for three seconds.
