manualshive.com logo in svg

Sony CLIE PEG-S360, Operating Instructions Manual

The Sony CLIE PEG-S360 is a handheld device packed with advanced features, and to make the most out of it, you need a comprehensive User Manual. Download the free manual from our website to explore all the functionalities this exceptional device has to offer.

Share
Download
background image

2

WARNING

To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to
qualified personnel only.

Owner’s Record

The model number and serial number are
located at the rear of the product. Record the
serial number in the space provided below.
Refer to them whenever you call upon your
Sony dealer regarding this product.

Model No. PEG-S360
Serial No.______________

The socket-outlet shall be installed near the
equipment and shall be easily accessible.

CAUTION

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.

NOTE

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by rotating the equipment off and
on, the user is encouraged to try to correct the
interference using one or more of the following
measures:
–

Reorient or relocate the receiving antenna.

–

Increase the separation between the
equipment and receiver.

–

Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.

–

Consult the dealer or an experienced radio/
TV technician for help.

If you have question about this product, call the
Sony Customer Information Center at keep on
next line 1-877-760-7669; or write to  the Sony
Customer Information Center at 12451 Gateway
Boulevard, Fort Myers, FL 33913. The number
below is for FCC-related matters only.

Declaration of Conformity

Trade Name: SONY
Model No.: PEG-S360
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road, Oradell,
NJ 07649 USA
Telephone No.: 201-930-6972
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful

interference, and

(2) This device must accept any interference

received, including interference that
may cause undesired operation.

The supplied interface cable must be used with
the equipment in order to comply with the
limits for a digital device pursuant to Subpart B
of Part 15 of FCC Rules.

On the supplied software

•

Copyright laws prohibit reproducing the
software or the software manual in whole or
in part, or renting the software without the
permission of the copyright holder.

•

In no event will SONY be liable for any
financial damage or loss of profits,
including claims made by third parties,
arising out of the use of the software
supplied with this player.

•

In the event a problem occurs with this
software as a result of defective
manufacturing, SONY will replace it at
SONY’s option or issue a refund. However,
SONY bears no other responsibility.

•

The software provided with this product
cannot be used with equipment other than
that which it is designated for use with.

•

Please note that, due to continued efforts to
improve quality, the software specifications
may be changed without notice.

Program © 2001 Sony Corporation, © 2001 Palm,
Inc. or its subsidiaries. All rights reserved.
Documentation © 2001 Sony Corporation

Summary of Contents for CLIE PEG-S360





























































































































































































































Reviews:

No comments

Related manuals for CLIE PEG-S360

Palm Z22 Supplementary Manual preview
Z22
Brand: Palm Pages: 3
Casio Cassiopeia E-115 User Manual preview
Cassiopeia E-115
Brand: Casio Pages: 67
e-survey UT12P Quick Start Manual preview
UT12P
Brand: e-survey Pages: 26
Bosch REXROTH IndraControl VEH 30.2 Project Planning Manual preview
REXROTH IndraControl VEH 30.2
Brand: Bosch Pages: 112
Dell AXIM X50 System Information Manual preview
AXIM X50
Brand: Dell Pages: 446
Dell X51 - Axim x51 520MHz 64MB WiFi Windows PDA Product Information Manual preview
X51 - Axim x51 520MHz 64MB WiFi Windows PDA
Brand: Dell Pages: 2
Nexcom MRC 2100 User Manual preview
MRC 2100
Brand: Nexcom Pages: 56
Hand Held Products 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual preview
7600BG-122-B4EE - Hand Held Products Dolphin 7600
Brand: Hand Held Products Pages: 102
Hand Held Products Dolphin 7400 User Manual preview
Dolphin 7400
Brand: Hand Held Products Pages: 133
Palm 1047ML Specifications preview
1047ML
Brand: Palm Pages: 2
Unitech PA970 Operation Manual preview
PA970
Brand: Unitech Pages: 169
JRC JUE-33 Brochure preview
JUE-33
Brand: JRC Pages: 2
Workabout Hand-Held Computer S Version Quick Start Manual preview
Hand-Held Computer S Version
Brand: Workabout Pages: 2
Rohde & Schwarz R&S FPH User Manual preview
R&S FPH
Brand: Rohde & Schwarz Pages: 484
IRiver SPINN User Manual preview
SPINN
Brand: IRiver Pages: 55

Brands by name

Popular brands

Load more brands