Con
n
ect
ions a
n
d
P
repar
ati
o
n
s
GB
10
Step 2: Connecting the Projector
Step 2:
Connecting the
Projector
When making connections, be sure to do the
following:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; plugs that are not
fully inserted often generate noise. When pulling
out a cable, be sure to pull it out from the plug, not
the cable itself.
• Refer to the operating instructions of the connected
equipment.
• When you connect your projector to PJ MULTI,
select the input signal with the “Input-A Signal Sel.”
setting in the SET SETTING
menu. (
Connecting with Video
Equipment
Rear of the projector
S Video or
video/audio
cable (not
supplied)
with SONY
logo
upside
to S video/
audio
output
to S
video
or
video/
audio
output
Video equipment
Signal
interface
cable
(supplied)
Video equipment
