background image

11

GB

CD

6

To program additional tracks, repeat

steps 3 to 5.

7

Press CD 

NX

 (or 

N

 on the remote).

To

Do this

Labeling a CD

— Disc Memo

You can label up to 50 CDs with titles of up to
20 symbols and characters. Whenever you load
a labeled CD, the title appears in the display.

Notes

• You cannot label a CD for which “CD-TEXT”

appears in the display.

• When labeling CDs for the first time, be

sure to erase all disc titles stored in the
system memory (see “Erasing a disc title”
on page 13).

• To ensure that disc titles are not erased from

memory, have the system connected to a wall outlet
at least once a day.

1

Press FUNCTION repeatedly to switch

the function to CD.

2

Press DISC SKIP on the remote

repeatedly until the desired CD
appears.

If “SHUFFLE” or “PROGRAM” appears in
the display, press PLAY MODE/TUNING
MODE repeatedly until both disappear.

3

Press NAME EDIT/CHARACTER on the

remote.

The cursor starts flashing.

4

Press NAME EDIT/CHARACTER on the

remote to select the desired type of
character.

Each time you press the button, the display
changes cyclically as follows:

 (Blank space) 

t

 A (Upper cases) 

t

 a

(Lower cases) 

t

 0 (Numbers) 

t

 ’

(Symbols)

continued

Cancel Program
Play

Press PLAY MODE/TUNING
MODE repeatedly until
“PROGRAM” and “SHUFFLE”
disappear.

Check the
program

Press CHECK on the remote
repeatedly in stop mode. After the
last track, “Check End” appears.

Clear a track
from the end

Press CLEAR on the remote in
stop mode.

Clear a specific
track

Press CHECK on the remote
repeatedly in stop mode until the
number of the track to be erased
appears, then press CLEAR.

Add a track to
the end of the
program in stop
mode

Perform steps 3 to 5.

Tips

• The program you made remains after Program Play

finishes. To play the same program again, press CD

NX

.

• “- -.- -” appears when the total CD program time

exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.

Summary of Contents for CHC-TB20





































Reviews: