background image

9

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1

Press 

(DSPL)

 for 2 seconds.

The hour indication flashes.

1

Turn the VOL control dial to set the
hour.

2

Press 

(SEL)

.

The minute indication flashes.

3

Turn the VOL control dial to set  the
minute.

2

  Press 

(DSPL)

.

The clock starts. After the clock setting is
completed, the display returns to normal
play mode.

Tip
You can set the clock automatically with the RDS
feature (page 18).

CD Player
CD/MD Unit (optional)

In addition to playing a CD with this unit
alone, you can also control external CD/MD
units.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.

Playing a disc

(with this unit)

Insert the disc (labelled side up).

Playback starts automatically.

If a disc is already inserted, press 

(SOURCE)

repeatedly until “CD” appears to start
playback.

To

Do this

Stop playback

Press 

(OFF)

.

Eject the disc

Press 

Z

.

Skip tracks

Turn the SEEK/AMS

– Automatic

control dial.

Music Sensor

[once for each track]

Fast-forward/

Turn the SEEK/AMS

reverse

control dial.

– Manual Search

[hold to desired point]

Notes
• When the last track on the disc is over, playback

restarts from the first track of the disc.

• With optional units connected, playback of the

same source will continue on to the optional CD/
MD unit.

continue to next page 

t

Summary of Contents for CDX-CA600X





















































Reviews: