20
GB
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press
(SHIFT)
, then press
(3)
(SET UP)
repeatedly until “CT” appears.
2
Press
(5)
(
t
) repeatedly until “CT on”
appears.
The clock is set.
3
Press
(SHIFT)
to return to the normal
display.
To cancel the CT function
Select “CT off” in step 2 above.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
Voice Drive
You can register an appropriate vocal phrase
for any source including CD/MD
*
, and the
radio station. Once the registration is
completed, you can request that source just by
pronouncing the registered vocal phrase for it
towards the supplied microphone. This unit
provides 12 “V Drive” boxes for
accommodating registered phrases.
*
When you connect to a CD/MD changer with a
PGM (Programme memory) function, you can
request a disc in the CD/MD changer.
Use the rotary commander to control this
function.
Note
While the unit is receiving, recording, or playing
back the traffic announcements, the voice drive
function does not work.
Selecting a “V Drive” box
for registration
1
Play a CD or MD, or tune in a radio
station that you wish to register a
phrase for.
2
Press and hold
(TALK)
on the rotary
commander until “V Drive” appears.
Note
When the unit enters the setting mode, the
disc playback or the radio reception will be
suspended.
Tip
If the “V Drive” box selected in step 2 already
has a registered phrase, the source
corresponding to it will be played or tuned in.
