Playing CDs
Getting Started
Getting Started
7
GB
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always close the front cover except when you
insert or remove discs.
5
Repeat Steps 3 and 4 to insert more discs.
6
Close the front cover by pressing
§
OPEN/
CLOSE.
With the label side
facing right
After inserting the disc, you can input the original
disc titles instead of the disc numbers (see
“Labeling Discs” on page 18) to locate it easily
when you start playing.
4
Insert a disc with the label side facing right.
ALL DISCS
CD1
2 0
DISC
S O N Y H I T S
Notes
•
Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It
may damage the player.
• Do not attach anything such as seals or sleeves to CDs. It
may damage the player or the disc.
• If you drop a disc into the player and the CD won’t go
into the slot correctly, consult your nearest Sony dealer.
• When transporting the player, remove all discs from the
player.
• Make sure you have inserted the disc into each slot at a
right angle to the rotary table. If the disc is not put in
straight, it may damage the player or the disc.
• Make sure the rotary table comes to a complete stop
before inserting or removing discs.
The front panel closes automatically when you press
·
. Be careful not to put your hand into the player after
pressing
·
otherwise your hand may be caught in the
front panel.
Removing CDs
After following Steps 1 to 3 of “Inserting CDs” on page
6, remove the discs. Then close the front cover.
