![Sony CD-TRV107 Service Manual Download Page 30](http://html.mh-extra.com/html/sony/cd-trv107/cd-trv107_service-manual_392181030.webp)
1-20
CCD-TRV107/TRV108/TRV308/TRV408/TRV608
80
— Additional Information —
About video cassettes
Selecting the cassette type
You can use both Hi8
and standard 8 mm video cassettes on your camcorder.
When you use a Hi8
video cassette, recording and playback are carried out in the
Hi8
system. When you use a standard 8 mm video cassette, recording and
playback are carried out in the standard 8 mm system.
However, if you record on a Hi8
video cassette in the LP mode, recording is
carried out in the standard 8 mm system.
If you play back a tape recorded on a different video recorder on your camcorder, the
playback mode is automatically selected according to the format in which the tape has
been recorded.
This Hi8
system is an extension of the standard 8 mm system, and was
developed to produce higher quality pictures.
You cannot play back a tape recorded in the Hi8
system correctly on video
recorders/players other than a Hi8 video recorder/player.
is a trademark.
is a trademark.
When you play back
The playback mode (SP/LP) and system, Hi8
, or standard 8 mm are
automatically selected according to the format in which the tape has been recorded. The
quality of the recorded picture in the LP mode, however, will not be as good as the SP
mode.
Foreign 8 mm video
Because TV color systems differ from country to country, you may not be able to play
back foreign pre-recorded tapes. Refer to “Using your camcorder abroad” (p. 83) to
check the TV color systems used in foreign countries.
81
Additional Information
About the “InfoLITHIUM” battery pack
What is the “InfoLITHIUM” battery pack?
The “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for
communicating information related to operating conditions between your camcorder
and the AC power adaptor.
The “InfoLITHIUM” battery pack calculates the power consumption according to the
operating conditions of your camcorder, and displays the remaining battery time in
minutes.
Charging the battery pack
•Be sure to charge the battery pack before you start using your camcorder.
•We recommend charging the battery pack in an ambient temperature of between 10°C
to 30°C (50°F to 86°F) until FULL appears indicating that the battery pack is fully
charged, in the display window. If you charge the battery pack outside of this
temperature range, you may not be able to efficiently charge the battery pack.
•After charging is completed, either disconnect the cable from the DC IN jack on your
camcorder or remove the battery pack.
Effective use of the battery pack
•Battery performance decreases in low-temperature surroundings. So, the time that the
battery pack can be used is shorter in cold places. We recommend the following to use
the battery pack longer:
– Put the battery pack in a pocket to warm it up, and insert it in your camcorder
immediately before you start taking shots.
– Use a large capacity battery pack (NP-FM50/FM70/QM71/FM90/FM91/QM91,
optional).
•Frequently using the LCD panel or frequently operating playback, fast forward or
rewind wears out the battery pack faster. We recommend using a large capacity
battery pack (NP-FM50/FM70/QM71/FM90/FM91/QM91, optional).
•Be certain to turn the POWER switch to OFF (CHG) when not taking shots or playing
back on your camcorder. Battery pack power is also consumed when your camcorder
is in the standby mode or playback is paused.
•Have spare battery packs handy for two or three times the expected recording time,
and make a trial recording before the actual recording.
•Do not expose the battery pack to water. The battery pack is not water-resistant.
Remaining battery time indicator
•If the power goes off although the remaining battery time indicator indicates that the
battery pack has enough power to operate, charge the battery pack fully again so that
the indication on the remaining battery time indicator is correct. Note, however, that
the correct battery indication sometimes will not be restored if it is used in high
temperatures for a long time or left in a fully charged state, or the battery pack is
frequently used. Regard the remaining battery time indication as approximate.
•The
E
mark, indicating there is little remaining battery time, sometimes flashes
depending on the operating conditions or ambient temperature and environment even
if the remaining battery time is 5 to 10 minutes.
How to store the battery pack
•If the battery pack is not used for a long time, do the following once a year to maintain
proper function.
1. Fully charge the battery pack.
2. Discharge on your camcorder.
3. Remove the battery pack from your camcorder and store it in a dry, cool place.
•To discharge the battery pack on your camcorder, leave your camcorder in CAMERA
(standby) mode without a cassette inserted until the power goes off.
82
About “InfoLITHIUM” battery pack
Battery life
•The battery life is limited. Battery capacity drops little by little as you use it more and
more, and as time passes. When the available battery time is shortened considerably, a
probable cause is that the battery pack has reached the end of its life. Please buy a new
battery pack.
•The battery life varies according to storage and operating conditions, and
environment for each battery pack.
83
Additional Information
Using your camcorder abroad
You can use your camcorder in any country or area with the AC power adaptor
supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz.
When charging the battery pack, use a commercially available AC plug adaptor
[
a
]
, if
necessary, depending on the design of the wall outlet
[
b
]
.
Your camcorder is an NTSC system based camcorder. If you want to view the playback
picture on a TV, it must be an NTSC system based TV with Video/Audio input jack.
The following shows TV color systems used overseas.
NTSC system
Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Guyana,
Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A.,
Venezuela, etc.
PAL system
Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany,
Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway,
Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand,
United Kingdom, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.
Simple setting of clock by time difference
You can easily set the clock to the local time by setting a time difference. Select WORLD
TIME in the menu settings. See page 72 for more information.
Using your camcorder abroad
AC-L10A/L10B/L10C
[a]
[b]