Sony CCD-CCD-TRV49E, Service Manual, Page: 114 / 234

5-8
1-1-3. Precaution
1. Setting the Switch
Unless otherwise specified, set the switches as follows and perform
adjustments without loading cassette.
1. POWER switch (SS-1000 block) ........................... CAMERA
2. NIGHT SHOT switch (Lens block) ................................. OFF
3. LIGHT switch (FK-1000 block) *1 ................................. OFF
4. DEMO MODE (Menu display) ....................................... OFF
5. DIGITAL ZOOM (Menu display) ................................... OFF
6. STEADY SHOT (Menu display) *2 ................................ OFF
7. DISPLAY (Menu display) *3 ............................ V-OUT/LCD
White
Black
841mm
1189mm
8. DISPLAY (CF-1000 block) *3 ......................................... ON
9. FOCUS switch (CF-1000 block/CF-077 board) ... MANUAL
10. BACK LIGHT (CF-1000 block/CF-077 board) .............. OFF
11. PROGRAM AE (Menu display) ...................................... OFF
12. PICTURE EFFECT (Menu display) ................................ OFF
13. 16 : 9 WIDE (MENU display) ......................................... OFF
*1: Video light model (CCD-TR618/TR618E/TR718E/TR728E/TR818/TRV49/TRV49E/TRV58/TRV58E/TRV59E/TRV68/TRV78/
TRV78E/TRV88/TRV98/TRV98E)
*2: Steady shot model (CCD-TR818/TRV68/TRV78/TRV78E/TRV88/TRV98/TRV98E)
*3: TRV model (CCD-TRV49/TRV49E/TRV58/TRV58E/TRV59E/TRV68/TRV78/TRV78E/TRV88/TRV98/TRV98E)
2. Order of Adjustments
Basically carry out adjustments in the order given.
Fig.5-1-6.
H
A=B
C=D
A B B
C D
A
Enlargement
V
Electronic beam scanning frame
CRT picture frame
B
A
Difference in level
Y
ello
w
Cy
an
Green
White
Magenta
Red
Blue
Y
ello
w
Cy
an
Green
White
Magenta
Red
Blue
Color bar chart (Color reproduction adjustment frame)
Fig. a
(VIDEO terminal
output waveform)
Fig. b (monitor TV picture)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the monitor TV display shown in Fig. b.
3. Subjects
1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 5-1-6. (Color reproduction
adjustment frame)
2) Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)
3) Flange back adjustment chart
Make the chart shown in Fig. 5-1-7 using A0 size (1189mm
×
841mm) black and white vellum paper.
Fig. 5-1-7.
Note:
Use matte vellum paper bigger than A0, and make sure the edges of
the black and white paper joined together are not rough.