6
CAV-M1000ES
• SERVICE POSITION OF BACK PANEL SIDE BOARD
• SERVICE POSITION OF AC INLET BOARD
AUDIO I/O BRD board
VIDEO I/O BRD board
IR OUT WB board
Six pieces of the boards are stacked.
• Check the IR OUT WB board and the VIDEO I/O BRD board in the state as shown. To check the portions that are not visible from outside,
remove the two boards together from the back panel and check those portions.
• Check the AUDIO I/O BRD board by removing it independently from the back panel, as shown in the illustration.
• Check the RJ45 board and the PRE OUT BRD board in the same manner as the procedure of checking the AUDIO I/O BRD board.
• Check the SPEAKER board by removing the bottom panel.
Check the AC INLET board by removing it together with the REGULATOR board from the chassis.
REGULATOR board
AC INLET board
Insulated sheet should be used.
Summary of Contents for CAV-M1000ES
Page 99: ...99 CAV M1000ES MEMO ...