46
If the camera moves in a different
direction from what you intended
The camera is preset to face toward the right whenever
the
b
button is pressed. You might wish to reverse the
direction in which the camera moves, for example, when
you change the direction of the camera while checking
the picture on the screen. In such cases, press the 2
(REV) button while holding down the L/R DIRECTION
SET button. To reset the setting, press the 1 (STD)
button while holding down the L/R DIRECTION SET
button.
The above setting changes only the signal emitted from
the remote commander, and does not change the setting
of the camera itself. Therefore, repeat the setting process
for each remote commander if you are using more than
one remote commander.
If the POWER lamp and NETWORK lamp
of the camera flash simultaneously, and
PAN-TILT ERROR! is displayed on the
menu screen
When the camera is moved or turned by hand or by
external shock, the microcomputer inside the camera
may not be able to recall the pan/tilt position properly,
in which case the camera automatically stops.
To reset the pan/tilt position, press the PAN-TILT
RESET button or turn off the camera and turn it on
again.
Zooming
Press either of the ZOOM buttons.
When you perform pan/tilt operations while the camera
is in telephoto mode, the moving speed of the image on
the screen may be a little jerky.
Operating multiple cameras with
the remote commander
1
Set the IR SELECT switch on the rear of the
camera you want to operate to 1, 2 or 3.
2
Press the CAMERA SELECT button on the
remote commander that corresponds to the
number set in step 1.
You can then operate the specified camera(s).
Every time you operate the camera(s) using the remote
commander, the CAMERA SELECT button pressed in
step 2 lights up.
Arrow button
Movement of the
camera
Setting
Note
L/R
DIRECTION SET
STD
1
While holding down
Press
REV
2
L/R
DIRECTION SET
While holding down
Press
Note
PAN-TILT
RE
S
ET
S
LOW
FA
S
T
ZOOM
L/R
DIRECTION
S
ET
T
T
W
W
Subject appears
closer. (Telephoto)
Zooms in or out
quickly (FAST side)
Subject appears
farther away. (Wide
angle)
Zooms in or out
slowly (SLOW side)
IR SELECT
1 2 3
POWER
CAMERA SELECT
1
2
3
AUTO
BACK LIGHT
MANUAL
FAR
FOCUS
NEAR
DATA SCREEN
CAMERA
SELECT
Summary of Contents for BRC-H800
Page 65: ...Sony Corporation ...
