D:\SONY TV\SY140117_Clover 55 (Rev-3)\4533567E31_US\US03STU.fm
XBR-79X907B/79X905B/65X907B/65X905B
4-533-567-
E3
(1)
19
Getting Start
e
d
Consider the following measures when
securing your TV to a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use two
angle braces (not supplied) to secure
the stand. For each angle brace use the
appropriate hardware to:
•
Attach one side of the angle brace to
the wall stud.
•
Attach the other side to the Stand.
2
Secure the TV to the Stand.
Use the optional hardware listed as
follows (not supplied):
•
M4 machine screw (screwed into the
TV’s rear cover)
•
A screw or similar (attach it to the
Stand)
•
Rope or chain (strong enough to
support the weight of the TV). Make
sure that there is no excess slack in
the rope or chain.
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please see below illustration.
3
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Please see below illustration for M6 eye
bolt length.
Recommended Measures
to Secure the TV
Stand
Angle brace
(not supplied)
Screw hole on
the rear cover
M4
machine
screw
(not
supplied)
Rope or chain
(not supplied)
Screw
(not
supplied)
Screw M4
Rope or chain
TV’s rear cover
8-12 mm
M6 eye bolts (not supplied)
Wall-
mount
holes
Rope or
chain (not
supplied)
Wall-anchor
(not
supplied)
M6 eye bolt
TV’s rear cover
8-12 mm
(Continued)
