Sony BRAVIA XBR-65X850E Service Manual Download

Page: 136 / 140

XBR-65/75X850E

APPENDIX-1

136

Voice Remote Control

• This remote has the following functions:

• Key
• Voice search

• Key codes (except “MIC” key) are sent by IR code. You can

control all TVs without pairing.

• “MIC” key code and voice data are sent by Bluetooth. Voice

search function could be used with only the paired TV.

How to use voice search function

Press “MIC” key

2. Voice search UI is displayed on TV. And MIC LED on the

remote will turn on.

3. While MIC LED is on, please speak a keyword which you

want to search.

4. Searching result will be displayed.

NOTE: If you cannot use voice search function, please check the next page.

“MIC” key: Bluetooth

Other keys: IR

Summary of Contents for BRAVIA XBR-65X850E













































































































































Search results

Summary of Contents for BRAVIA XBR-65X850E

Reviews:

Related manuals for BRAVIA XBR-65X850E

Brands by name

Popular brands

Sony BRAVIA XBR-65X850E, Service Manual

Search results

Summary of Contents for BRAVIA XBR-65X850E

Reviews:

Related manuals for BRAVIA XBR-65X850E

Brands by name

Popular brands