Sony Bravia KDS-60R2000 Operating Instructions Manual Download

Page: 5 / 52

art
-u

Gui

Carrying your TV

Carrying the TV requires at least two people.
When moving the TV, place one hand in the hole on
the lower portion of the TV while supporting the top
with the other hand, as shown in the illustration below.

Notes

• Do not hold by the pedestal or the front panel of the TV.

Doing so may cause these parts to break off.

• To ensure the safety of children and the TV, keep children

away from the TV during installation. Climbing on or
pushing the TV or its stand may cause it to fall and damage
the TV.

• When installing your TV against a wall, keep your TV at

least 10 cm away from the wall to provide proper
ventilation.

Preventing the TV from toppling over

Note

When using the SU-GW12 stand (not supplied) for your TV,
you must use the support belt.

Installing the TV against a wall

Keep the TV at least 10 cm away from the wall to
provide proper ventilation.
Blocking the ventilation opening of the cooling fan
may damage the TV.

Allow this much space

Do not grasp the
pedestal or the front
panel of the TV.

30 cm

10 cm

Continued

Summary of Contents for Bravia KDS-60R2000





















































Search results

Summary of Contents for Bravia KDS-60R2000

Reviews:

Related manuals for Bravia KDS-60R2000

Brands by name

Popular brands

Sony Bravia KDS-60R2000, Operating Instructions Manual

Search results

Summary of Contents for Bravia KDS-60R2000

Reviews:

Related manuals for Bravia KDS-60R2000

Brands by name

Popular brands