Sony Bravia KDL-43WG6 Series, Service Manual

Page: 143 / 151

4.14 ATMOS CEC Disable
1) Go to “ATMOS CEC DISABLE” and Press “<” or “>” button to select ‘0’ or ‘A’
2) After select the option that you wish, press “Home” to confirm the selection.
Option Execution Effect
0 (default)
The TV checks whether HDMI1(ARC)
is connected to an amplifier that
support ARC & Atmos or not, and sets
either Atmos EDID/ Non Atmos EDID.
A
The TV skip Atmos checking when
HDMI1(ARC) is connected to an
amplifier that support ARC and set
Atmos EDID even when amplifier
doesn’t support Atmos.
ATMOS_CEC_DISABLE (EEPROM 0x30A0)
Data :
[0/A] Default : 0
Purpose : Data [A] is able to skip Atmos judgment by CEC
<Report Short Audio Descriptor> comes from the amplifier,
and to set Atmos EDID as the service c/m to an amplifier
that supports Atmos but it reply NO Atmos.
Remarks :
1) This data is not changed by software update or AC-Off-
On, only change from service menu.
2) Need to turn AC off/on after change setting in order
algorithm to take effect.
143
SYS SET
2019/01/30 02:46:26 (GMT+09:00)