31
GB
Using
Me
nu F
uncti
ons
Control for HDMI
Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for
HDMI. When set to “On”, the following menu items can be
performed. However, power consumption in standby mode is
higher than usual.
If the specific Sony equipment that is compatible with control
for HDMI is connected, this setting is applied to the
connected equipment automatically when the “Control for
HDMI” is set to “On” using the TV.
Auto Devices Off
When this is set to “On”, the connected equipment that is
compatible with control for HDMI turns off when you switch
the TV to standby mode using the remote.
Auto TV On
When this is set to “On”, the TV turns on when you turn on
the connected equipment that is compatible with control for
HDMI.
Device List
Update
Creates or updates the “HDMI Device List”. Up to 11
compatible equipment items can be connected, and up to 5
equipment items can be connected to a single socket. Be sure
to update the “HDMI Device List” when you change the
connections or settings. If the specific Sony equipment that is
compatible with control for HDMI is connected, “Control for
HDMI” is applied to the connected equipment automatically
when the “Device List Update” is executed on the TV.
HDMI Device List
Displays a list of connected equipment that is compatible
with control for HDMI.
~
• You cannot use “Control for HDMI” if the TV operations are linked to the
operations of an audio system that is compatible with control for HDMI.
Product Information
Displays product information of the TV.
All Reset
Resets all settings to factory settings and displays the initial set-up screen.
~
• Do not turn off the TV or press any buttons during “All Reset” (takes about 30
seconds).
• Settings for the Digital Favourites lists, country/area, language, and auto tuned
channels will also be reset to factory settings.
Analogue Set-up
Auto Tuning
Tunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Programme Sorting
Changes the order of analogue channels stored in the TV.
1
Press
F
/
f
to select the channel you want to move to a new position, then press
.
2
Press
F
/
f
to select the new position for the channel, then press
.
(Continued)
Summary of Contents for Bravia KDL-40S40 Series
Page 77: ...39FI Lisätietoja ...
Page 191: ...39GB Additional Information ...
Page 278: ......
Page 279: ......