16
GB
Channel Setup
Cable/Antenna
Cable:
Select if you are receiving cable
channels via Cable TV provider.
Antenna:
Select if you are using an
antenna.
Auto Program
Automatically sets up the channel list on
the TV for all receivable channels.
Select [Auto Program] then press
.
Add Digital Channels
Select [Add Digital Channels].
Select [OK] to add digital channels.
Show/Hide Channels
Allows you to show or hide channels that
appear when you use the
CH/PROG +/–
buttons.
Press
/
to scroll through the channels
until you find the channel you want to
show or hide. Then press
to select it.
Press
/
to determine if the channel will
be shown or hidden. Then press
to
select it.
Edit Analog Channel Labels
Allows you to assign labels (such as
station call letters) to channel numbers.
Press
F
/
f
to scroll through the channel
numbers. Then press
to select the
channel number that you want to assign a
label.
Press
F
/
f
to scroll through the label
characters ([A-Z], [0-9], etc.). Press
g
to
move to the next character. Repeat the
previous steps to add up to seven
characters to the label. When finished,
press .
Analog Channel Adjustment
Channel:
Selects a channel number.
Analog Fine Tune:
[Custom] selection
allows you to fine-tune the selected
analog channel manually if you feel
that a slight tuning adjustment may
improve picture quality. Select [Auto]
to adjust to the most appropriate
analog channel.
Audio Filter:
Select [Low] or [High] to
improve the sound of individual
channels when distortion occurs in
mono broadcasts.
Digital Channel Tuning Mode
Select [Major Channels] to tune just the
main channels with
CH/PROG +/–
.
Select [Major & Minor Channels] to tune all
channels with
CH/PROG +/–
.
FM Radio Setup
Presets up to 30 FM radio stations that can
be received in your area.
Auto Program:
Allows you to
automatically tune and store all the
available channels.
FM Radio Presets:
Allows you to
manually tune and store each
available channel one at a time.
Note
• To enable this feature, access to FM Radio
mode by using Home (Menu) (page 12), then
preset your desired FM radio stations
according to the steps mentioned above.
Area Selection
Select the area you live in.
EWBS Audible Tone
When set to [On], broadcast signal may
transmit emergency information and
notify users when the TV is in standby
mode.
Note
• To enable this feature, select [On] in Audible
Tone setup screen during Initial Setup or go to
[EWBS Audible Tone] settings in [Channel
Setup] to change the settings.
• The standby power consumption will increase
if [On] is set.
