66
TV is locked to one
channel
• Perform
Auto Program
to add receivable channels that are not
present in the TV’s memory (see pages 20 and 44).
Cannot receive or select
channels
• Perform
Auto Program
to add receivable channels that are not
present in the TV’s memory (see pages 20 and 44).
• To receive or select cable channels, make sure that
Signal Type
in the
Channel
settings is set to
Cable
(see page 44). To receive
or select UHF channels over an antenna, make sure
Signal Type
is set to
Antenna
.
The TV turns off
automatically
• Check if
Sleep Timer
is activated (see page 50).
• Check
Idle TV Standby
in the
Eco
settings.
• Check
Duration
of
Photo Frame Settings
.
• Check
Duration
if TV is turned on by
On Timer
.
No picture from some
video sources
• Check the connection between the optional video equipment
and the TV.
• Press
INPUT
on the remote control (see page 32).
Poor picture
Picture quality not as
good as viewed at the
store
• Picture quality depends on the signal content. See Quick Setup
Guide (supplied) to display the best possible picture for that
signal.
Broadcast HD formats
have poor quality
• Content and signal quality are controlled by the signal provider.
Many HD channels and content are actually upscaled versions of
standard-definition broadcasts. The picture is affected by the
quality of the signal received, which varies between channel and
program.
Double images or ghosts • Check cable/antenna connections.
• Check the antenna location and direction.
Only snow and noise
appear on the screen
• Check if the antenna is broken or bent.
• Check if the antenna has reached the end of its serviceable life.
(3-5 years in normal use, 1-2 years at the seaside.)
Dotted lines or stripes
• Keep the TV away from noise sources such as cars, motorcycles,
or hair-dryers.
• If using 300 ohm twin lead, move the excess lead away from the
TV or try using 75-ohm coaxial cable instead.
No color / Dark picture /
Color is not correct / The
picture is too bright
• Adjust the
Picture Mode
options in the
Picture
settings (see
page 38).
• If you set the
Power Saving
mode to
Low
or
High
, it will
enhance the black level.
Noisy picture
• Make sure that the antenna is connected using a 75-ohm coaxial
cable (not supplied).
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged
antenna cable.
Condition
Explanation/Solution
Summary of Contents for Bravia KDL-32EX340
Page 75: ......
