background image

2

GB

Table of Contents

Safety Information  . . . . . . . . . . . . . . . . . . . . . 2
Protecting the TV Screen (OLED TV) . . . . . . . 4

Parts and Controls  . . . . . . . . . . . . . . . . . . . 5

Controls and Indicators  . . . . . . . . . . . . . . . . . 5

Using Remote Control . . . . . . . . . . . . . . . . 6

Remote Control Parts Description . . . . . . . . . 6

Connection Diagram  . . . . . . . . . . . . . . . . . 8

Using Sound Bar (not supplied)  . . . . . . . 10

Installing the TV to the Wall  . . . . . . . . . . .11

Using the optional Wall-Mount Bracket 

 

(SU-WL850 or SU-WL450)  . . . . . . . . . . . . . .  11

Troubleshooting . . . . . . . . . . . . . . . . . . . .  12

Troubles and Solutions. . . . . . . . . . . . . . . . . 12

Specifications . . . . . . . . . . . . . . . . . . . . . .  13

Introduction

Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and 
retain it for future reference.

Note

• Before operating the TV, please read the “Safety Information” 

(page 2). 

• Read the supplied Safety Information for additional safety 

information.

• Instructions about “Installing the TV to the Wall” are included 

within this TV’s instruction manual.

• Images and illustrations used in the Setup Guide and this 

manual are for reference only and may differ from the actual 
product.

Location of the identification label

Labels for the TV Model No. and Power Supply rating are located 
on the rear of the TV.

Installation/Set-up

Install and use the TV set in accordance with the instructions 
below in order to avoid any risk of fire, electric shock or damage 
and/or injuries.

Installation

• The TV set should be installed near an easily accessible AC 

power outlet (mains socket).

• Place the TV set on a stable, level surface to prevent it from 

falling over and causing personal injury or property damage.

• Install the TV where it cannot be pulled, pushed, or knocked 

over.

• Install the TV so that the TV’s Table-Top Stand does not protrude 

out from the TV stand (not supplied). If the TV’s Table-Top Stand 
protrudes out from the TV stand, it may cause TV set to topple 
over, fall down, and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall-mount 

installations.

• For safety reasons, it is strongly recommended that you use 

Sony accessories, including:

Wall-Mount Bracket SU-WL850 (only on limited region, 
country, TV model)

Wall-Mount Bracket SU-WL450

To attach the Table-Top 
Stand, refer to the Setup 
Guide.

Help

Find more troubleshooting and other useful information 
directly from your TV. Press 

HELP

 on the remote control to 

display a list of topics, or to search by keyword.

Help Guide (Manual)

For more detailed information, select [Help Guide] from the 
Help menu on your TV. You can also check the Help Guide from 
your PC or smartphone (information provided on the back 
cover of this manual).

Safety Information

Summary of Contents for BRAVIA KD Series

















Reviews: