background image

13

GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You are concerned about image retention.

If the same image is displayed repeatedly or for 
long periods of time, image retention may 
occur. To reduce image retention, we 
recommend that you turn off the TV normally by 
pressing the power button on the remote 
control or the TV.

Note

• Perform Panel refresh manually only when image 

retention is particularly noticeable. As a reference, 
perform it only once a year. Avoid performing it more 
than once a year because it may affect the usable life 
of the panel.

• Images that include clocks, logos and bright colours 

(including white) easily cause image retention. Avoid 
displaying these types of images for long periods of 
time, otherwise image retention may occur.

A white line appears on the screen. 

Panel refresh automatically runs after the TV has 
been used for long periods of time to reduce 
image retention. Panel refresh starts after the TV 
is turned off and takes about one hour to 
complete. A white line may be displayed on the 
screen during the Panel refresh. This is not a 
malfunction of the TV.

The message [Panel refresh did not finish…] is 
displayed.

Panel refresh automatically runs after the TV has 
been used for long periods of time to reduce 
image retention. If the TV is turned on, the AC 
power cord (mains lead) is unplugged, or the 
room temperature falls outside of the range 
between 10 ºC and 40 ºC during the Panel 
refresh, the process will not be completed and 
this message will appear.

If Panel refresh started automatically, it will restart 
when you turn off the TV with the remote control.

If Panel refresh initiated manually, you must 
select it again.

Specifications

System

Panel system

OLED (Organic Light Emitting Diode) Panel

TV system

Depend on your country/area selection
Analogue: B/G, I, D/K, M
Digital: DVB-T/DVB-T2

Colour system

PAL/SECAM/NTSC3.58/NTSC4.43

Channel coverage

Depend on your country/area selection
Analogue: UHF/VHF/Cable
Digital: UHF/VHF

Sound output

10 W + 10 W + 10 W + 10 W

Wireless technology

Protocol IEEE802.11ac/a/b/g/n 
(IEEE802.11ac may not be available depending on 
countries/regions.)
Bluetooth Version 4.1

Input/Output jacks

Antenna (aerial)/cable

75 ohm external terminal for VHF/UHF

/

 VIDEO IN

Video/Audio input (mini jack)

HDMI IN 1/2/3/4 (support 4K resolution, HDCP 

 

2.3-compatible)

Video:

4096 × 2160p (50, 60 Hz)*

1

*

2

, 4096 × 2160p 

 

(24 Hz)*

1

, 3840 × 2160p (50, 60 Hz)*

2

,

 

3840 × 2160p (24, 25, 30 Hz), 1080p (30, 50, 

 

60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 
50, 60 Hz), 720/24p, 576p, 576i, 480p, 480i, PC 
Formats*

3

Audio:

5.1 channel linear PCM: 32/44.1/48/88.2/96/
176.4/192 kHz 16/20/24 bits, Dolby Digital, 
Dolby Digital Plus and DTS

ARC (Audio Return Channel) (HDMI IN 3 only)

(Two channel linear PCM: 48 kHz 16 bits, Dolby 
Digital, Dolby Digital Plus, DTS)

 DIGITAL AUDIO OUT (OPTICAL)

Digital optical jack (Two channel linear PCM: 

 

48 kHz 16 bits, Dolby Digital, DTS)

AUDIO OUT 

/

 (Stereo mini jack)

Headphone, Audio output, Subwoofer

Summary of Contents for BRAVIA KD Series

















Reviews: