13
GB
Wa
tch
ing
TV
Watching TV
1
Press
1
on the TV (top side) to switch on
the TV.
When the TV is in standby mode (the
1
(standby)
indicator on the TV (front) is red), press
"/1
on
the remote to switch on the TV.
2
Press DIGITAL to switch to digital mode or
ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
3
Press the number buttons or PROG +/- to
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second and third digits
within two seconds.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see page 15.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
Additional operations
Watching TV
3
2
2
3
1
: Interactive service (MHEG Digital Text) is
available
: Interactive service (MHEG Digital Text) is
currently disabled
: Radio service
: Scrambled/Subscription service
:
Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
:
Parental Lock
: Current programme is being recorded
To
Do this
Turn off the TV
temporarily
(Standby mode)
Press
"/1
.
Turn on the TV
from Standby mode
without sound
Press
%
. Press
2
+/- to set the
volume level.
Turn off the TV
Press
1
on the TV (top side).
Note
To disconnect the TV
completely, pull the plug from
the mains.
Adjust the volume
Press
2
+ (increase)/
- (decrease).
Mute the sound
Press
%
. Press again to restore.
Access the
Programme index
table (in analogue
mode only)
Press
. To select an analogue
channel, press
F
/
f
, then press
.
To access the Input signal index
table, see page 18.
Continued
